Sprinkler Repair Basics
Among the most common sprinkler repairs is a malfunctioning solenoid. The solenoid communicates with the sprinkler controller, and a malfunctioning solenoid can cause leaks and other problems. To replace the solenoid, you must disassemble the valve and remove all connections. Some sprinkler models require the replacement of more than one solenoid. The process of replacing the solenoid varies with sprinkler models, so you should refer to the manufacturer’s guide or hire a professional to perform the repair.
There are many ways to get started repairing a sprinkler system. Depending on the scope of the damage and the type of repair, it can cost anywhere from $50 to $100 per hour. While some sprinkler repair professionals only dig up the visible components of the system, others dig up the underground ones, which can result in more work and a higher bill. However, some sprinkler repair work can be done by the homeowner, and it only requires some basic tools and cleaning supplies. In order to ensure that your sprinkler system is properly functioning, a professional can do sprinkler system maintenance on a regular basis.
If a leak is the cause of the water pressure issues, the first step in sprinkler repair is to check the irrigation system’s water pressure. A sprinkler system that uses electricity will usually lose about 15 to 25 psi, which is easily detected with a pressure gauge attached to the valve farthest from the point of connection. Electrical issues may be the culprit, and special electrical equipment may be necessary to identify the source of the problem. Moreover, a leaking zone is most likely due to a ruptured diaphragm inside the valve. Fortunately, this problem is usually simple to solve and is relatively inexpensive.
The main reason for sprinkler head failure is that the head itself is obstructed by debris. If this is the case, you should remove the debris and replace the sprinkler head. However, it is better to leave this job to a professional. If you are not an irrigation professional, do not try to fix a sprinkler head yourself. You may risk injury. If you have a sprinkler head that’s cracked or broken, it’s best to replace it.
Sprinkler heads that don’t rotate will require an average sprinkler repair cost of $50-90 per head. Depending on the number of sprinkler heads, you may be eligible for discounts. Clogged sprinkler heads can be expensive to repair, and they require a new sprinkler head. Often, the problem stems from the valve, but they are also susceptible to debris and clogged pipes. You may need to dig around the yard to find the culprit.
You can avoid having to hire a sprinkler repair specialist if you suspect that you have a broken sprinkler system. First, you should know where to find the sprinkler repair valve. The main shutoff valve is usually found in the valve box or a vertical pipe with a yellow cap. You may have left the manual drains open during the winter. If it’s not working properly, you may need to adjust the sprinkler heads for the appropriate watering of the landscape.